[SOLVED] Shibari not showing my BT adapter, cannot pair

UPDATE: After doing this once, running the Shibari Dom Server one more time, then pressing the on button on the PS3 controller paired properly!!!!!!!

[21:53:19 INF] Found SIXAXIS device \?\BTHPS3BUS#{53F88889-1AAF-4353-A047-556B69EC6DA6}#9&1F715471&0&0498F3AB5500#{7B0EAE3D-4414-4024-BCBD-1C21523768CE} (BTHPS3BUS{53F88889-1AAF-4353-A047-556B69EC6DA6}\9&1F715471&0&0498F3AB5500)
[21:53:19 INF] Device DualShock3 (04:98:F3:AB:55:00) got attached via Bluetooth
[21:53:19 INF] Connecting ViGEm target Nefarius.ViGEm.Client.Targets.Xbox360Controller
[21:53:19 INF] ViGEm target Nefarius.ViGEm.Client.Targets.Xbox360Controller connected successfully

Now to test it.....

END UPDATE

So, after a very long absence I am back, and trying this whole thing again. Today I:

Installed BthPS3 Bluetooth Drivers_v1.2.2
Installed 64 version of FireShock (latest)
Installed ViGEmBus_Setup_1.16.116
Downloaded latest Shibari

Upon starting Shibari Dom Server I recieve:

[21:10:44 INF] Launching Shibari, version: 1.5.164.0
Configuration Result:
[Success] Name Shibari.Dom.Server
[Success] DisplayName Shibari Dom Server
[Success] Description Manages AirBender, FireShock & BthPS3 Devices.
[Success] ServiceName Shibari.Dom.Server
Topshelf v4.2.1.215, .NET Framework v4.0.30319.42000
[21:10:45 INF] Loaded sink plugin ViGEm Xbox 360 Sink
[21:10:45 INF] Loaded bus emulator BthPS3 Bus Emulator
[21:10:45 INF] Starting bus emulator BthPS3 Bus Emulator
[21:10:45 INF] BthPS3 Bus Emulator started
[21:10:45 INF] Bus emulator BthPS3 Bus Emulator started successfully
[21:10:45 INF] Loaded bus emulator FireShock Bus Emulator
[21:10:45 INF] Starting bus emulator FireShock Bus Emulator
[21:10:45 INF] FireShock Bus Emulator started
[21:10:45 INF] Bus emulator FireShock Bus Emulator started successfully
The Shibari.Dom.Server service is now running, press Control+C to exit.

However, I know that I want to connect by BT, and if I read the Bluetooth Pairing with Shibari instructions I should be seeing an entry for the "Bluetoh Host Address" info, but as shown above, I don't have that entry when running Shibari Dom Server. I have tried running the PowerShell Import-Module command (and keeping it open), but that doesn't expose the Bluetooth Host Address. So I am stumped as what to do next,

Just FYI, I confirm that my controller works on USB as when instered I get the below, and subsequently the Windows XBOX 360 Sucsess message in the notification tray.

[21:42:09 INF] Found FireShock device \\?\USB#VID_054C&PID_0268#6&26030B37&0&7#{51AB481A-8D75-4BB6-9944-200A2F994E65} (USB\VID_054C&PID_0268\6&26030B37&0&7)
[21:42:09 INF] Device is DualShock3 with address 04:98:F3:AB:55:00 currently paired to 00:02:72:D1:E9:92
[21:42:09 INF] Device DualShock3 (04:98:F3:AB:55:00) got attached via USB
[21:42:09 INF] Auto-pairing device DualShock3 (04:98:F3:AB:55:00) to 00:02:72:D1:E9:92
[21:42:09 INF] Connecting ViGEm target Nefarius.ViGEm.Client.Targets.Xbox360Controller
[21:42:09 INF] ViGEm target Nefarius.ViGEm.Client.Targets.Xbox360Controller connected successfully

By the way, output above shows the "currently paired to" and "Auto-pairing" addresses as correctly finding by BT adapter, this is good, I think? However, when I disconnect the USB to see if I can connect to BT, the Shibari Dom Server vanishes. Subseuently, when I press the on button on the PS3 controller, I hear the Windows "connect" sound, but after a few seconds I hear the Windows "disconnect" sound.

any ideas?

thanks,
RDP

Is there still an issue? I can't quite tell from the spaghetti-code-style of the writing

you should hear 2 connect sounds(rising pitch) when pairing via blue tooth, the first is the DS3 being connected, the second is the xbox controller emulator being connected.

Yes, everything seems fine now.

thanks!

RDP

And what did you actually do to fix?