Discussion and Support

• A

  Controllers only work with cable. Connect over bluetooth fine and worked with the old SCP over bluetooth, but with new builds no input detected.
  • A1min2  

  1
  0
  Votes
  1
  Posts
  23
  Views

  No one has replied

• E

  BthPS3 controller won't stay connected
  • eqagunn  

  11
  0
  Votes
  11
  Posts
  63
  Views

  E

  @nefarius said in BthPS3 controller won't stay connected: That's not in issue with BthPS3, but most likely with Shibari. Some controllers apparently expect periodic data sent to them which Shibari doesn't do. I'll keep a possible solution/test in mind but for now I call it a day. Alright. Though the light on controller never switches from fast blinking to non-blinking/slow-blinking/connected one which makes me assume that the initial connection didn't go through completely. Take care man!
• W

  Issues with the installation of ViGEm
  • Wolff  

  3
  0
  Votes
  3
  Posts
  36
  Views

  

  setupapi.dev.log relevant snippet: sto: {Stage Driver Package: c:\program files\nefarius software solutions\vigem bus driver\drivers\win10\vigembus.inf} 20:34:15.333 inf: {Query Configurability: c:\program files\nefarius software solutions\vigem bus driver\drivers\win10\vigembus.inf} 20:34:15.339 inf: Driver package uses WDF. inf: Driver package 'vigembus.inf' is configurable. inf: {Query Configurability: exit(0x00000000)} 20:34:15.343 flq: Copying 'c:\program files\nefarius software solutions\vigem bus driver\drivers\win10\x64\ViGEmBus.sys' to 'C:\WINDOWS\System32\DriverStore\Temp\{7c7efb0d-ebe7-2542-919b-357966378c7c}\x64\ViGEmBus.sys'. flq: Copying 'c:\program files\nefarius software solutions\vigem bus driver\drivers\win10\x64\WdfCoInstaller01009.dll' to 'C:\WINDOWS\System32\DriverStore\Temp\{7c7efb0d-ebe7-2542-919b-357966378c7c}\x64\WdfCoInstaller01009.dll'. flq: Copying 'c:\program files\nefarius software solutions\vigem bus driver\drivers\win10\ViGEmBus.cat' to 'C:\WINDOWS\System32\DriverStore\Temp\{7c7efb0d-ebe7-2542-919b-357966378c7c}\ViGEmBus.cat'. flq: Copying 'c:\program files\nefarius software solutions\vigem bus driver\drivers\win10\vigembus.inf' to 'C:\WINDOWS\System32\DriverStore\Temp\{7c7efb0d-ebe7-2542-919b-357966378c7c}\vigembus.inf'. sto: {DRIVERSTORE IMPORT VALIDATE} 20:34:15.413 sig: {_VERIFY_FILE_SIGNATURE} 20:34:15.497 sig: Key = vigembus.inf sig: FilePath = C:\WINDOWS\System32\DriverStore\Temp\{7c7efb0d-ebe7-2542-919b-357966378c7c}\vigembus.inf sig: Catalog = C:\WINDOWS\System32\DriverStore\Temp\{7c7efb0d-ebe7-2542-919b-357966378c7c}\ViGEmBus.cat ! sig: Verifying file against specific (valid) catalog failed. sig: {_VERIFY_FILE_SIGNATURE exit(0x800b010c)} 20:34:15.509 sig: {_VERIFY_FILE_SIGNATURE} 20:34:15.510 sig: Key = vigembus.inf sig: FilePath = C:\WINDOWS\System32\DriverStore\Temp\{7c7efb0d-ebe7-2542-919b-357966378c7c}\vigembus.inf sig: Catalog = C:\WINDOWS\System32\DriverStore\Temp\{7c7efb0d-ebe7-2542-919b-357966378c7c}\ViGEmBus.cat ! sig: Verifying file against specific Authenticode(tm) catalog failed. sig: {_VERIFY_FILE_SIGNATURE exit(0x800b010c)} 20:34:15.522 !!! sig: An unexpected error occurred while validating driver package. Catalog = ViGEmBus.cat, Error = 0x800B010C !!! sig: Driver package is considered unsigned, and Code Integrity is enforced. !!! sig: Driver package failed signature validation. Error = 0xE0000247 sto: {DRIVERSTORE IMPORT VALIDATE: exit(0xe0000247)} 20:34:15.525 !!! sig: Driver package failed signature verification. Error = 0xE0000247 !!! sto: Failed to import driver package into Driver Store. Error = 0xE0000247 sto: {Stage Driver Package: exit(0xe0000247)} 20:34:15.529 In conclusion: no clue. Signature verification fails for whatever reason
• H

  HidGuardian Feedback
  • HazePhase  

  1
  0
  Votes
  1
  Posts
  16
  Views

  No one has replied

• E

  DS3 Sixaxis official Sony controller (no ripoff), button mapping problem
  • Edouard  

  1
  0
  Votes
  1
  Posts
  56
  Views

  No one has replied

• E

  BthPS3 & Post-Setup Instructions problem
  • Edouard  

  28
  0
  Votes
  28
  Posts
  1331
  Views

  E

  Hello, I know this post is old but I did find how to make it work despite being on W10 LTSC that is why I post in case if anyone have the exact same problem. The problem was the driver they gave me (shipped with the dongle in a little disc) with my bluetooth dongle, as you can see in an upper screenshot from December 2019, I only had "CSR radio bluetooth" opposed to everyone else having the windows drivers that I have now ! (minus the nefarius of course). If anyone have the same exact problem as me, it's simple, just uninstall the shitty CSR driver, insert the CD, the installer is a uninstaller too so nothing to explain here. After that I did go in this page(I don't know the english name sorry), and choosed the 1st option to search for new modification on the hardware and boom it did install me the windows bluetooth driver. And the bluetooth I had was a cheap one the same as the screenshot of cnrez, you can see the disc under it too, and after installing everything work, usb and bluetooth, I have just one problem I did now saw in the Q&A, but I think I'll do another post for it. Have a nice day
• S

  After Bthps3 install HDMI will not connect
  • staggerlea  

  4
  0
  Votes
  4
  Posts
  37
  Views

  S

  Im not sure its a bit of an oddball, After re-installation I managed to re-enable my HDMI but only when all the Nefarius tools are disabled, Im currently toying with different drivers for my (not impressive) GTX 970m card. I'll get it figured and let ya know what it took to make kitty purr. Thanks tho, Keep up the great work!!
• R

  STATUS_DEVICE_POWER_FAILURE Driver Error
  • ryan86me  

  3
  0
  Votes
  3
  Posts
  48
  Views

  R

  Here are some screenshots of the specific device that's facing issues. I went ahead and uninstalled everything, downloaded the latest versions, and got everything reinstalled and placed into clean, empty folders, to no avail. I'm using Shibari v1.5.166.0, BthPS3 v1.2.2, ViGEmBus v1.16.116, and FireShock v3.0.0.0 (64-bit). Let me know if you need any more information!
• G

  [SOLVED] Help with Intel Bluetooth and DS3
  • Gonzakpo  

  5
  0
  Votes
  5
  Posts
  113
  Views

  G

  @nefarius the new bluetooth driver worked BEAUTIFULLY. Thanks for your works!!
• T

  [SOLVED] BthPS3 installation failure
  • Tumppi066  

  10
  0
  Votes
  10
  Posts
  135
  Views

  S

  naww, i finally got everything solved, youre newest shibari release didnt contain a .exe file but i found a link to the straight shibari.zip you had posted on another question it contained it and i have everything running smooth now, your a god thanks man ill definitly be donating!!!!!!
• M

  Custom HID Output report for BthPS3
  • mmbossoni  

  2
  0
  Votes
  2
  Posts
  33
  Views

  

  @mmbossoni said in Custom HID Output report for BthPS3: First of all I would like to thank you for such an amazing piece of software. Getting everything working flawlessly like that is an achievement. Thanks! Believe me, it certainly is @mmbossoni said in Custom HID Output report for BthPS3: I would like to know if there is any way to set a custom Hid output report for BthPS3 in Shibari or, in case there isn't, if you have any plans supporting such feature. Other then directly altering the Shibari code not at the moment, no. Although it would be fairly easy ti achieve that with the recently introduced configuration system. I don't really have plans to prioritize that at the moment since I'm working on something different currently that I wanna get off the ground. @mmbossoni said in Custom HID Output report for BthPS3: I have one of those chinese clones that require a tweaked output report to work properly. Always wondered how they work on an unmodified PS3 While I want to keep the projects as dynamic and open as possible I honestly want to keep these kinds of modifications down to a minimum, I don't want another SCP disaster where in the end nobody knows why it works or doesn't work and giving users too much power to break things and spam my inbox Will keep it in mind though! Cheers
• A

  Inputs not working over Bluetooth with new shibari versions and specific software installed.
  • Astro  

  4
  0
  Votes
  4
  Posts
  107
  Views

  

  Gosh, how did I manage to break things this time
• S

  Ds3 sometimes no input although succesfully connected bug?
  • steve  

  3
  1
  Votes
  3
  Posts
  99
  Views

  S

  thanks for your reply!!! i just admire so much your software and i want to help everyone using it ..no worries ,you have already done so much! p.s. if any testing is needed i am here and on discord to help !
• 

  [SOLVED] Windows has stopped bluetooth device (after bthps3 installation)
  • Leaf  

  10
  0
  Votes
  10
  Posts
  138
  Views

  

  As long as it's on the design side of things rather than the coding, I'm sure I can help you out somehow
• T

  [SOLVED] Discord link
  • TCP  

  3
  0
  Votes
  3
  Posts
  53
  Views

  

  I fixed it for good now
• 

  I can’t remove the drivers from ScpToolkit
  • Megalodon  

  19
  0
  Votes
  19
  Posts
  118
  Views

  

  You seem to deliberately misinterpret what I'm saying. There are no SCP drivers on your system, whatever issue you're experiencing has nothing to do with my software, period. I don't know why you seem to think that's the case, the proof is right there and this conversation is leading nowhere.
• Z

  This topic is deleted!
  • zzamanasad  

  1
  0
  Votes
  1
  Posts
  3
  Views

  No one has replied

• K

  Still cant use my DS3 via bluetooth
  • kempol  

  6
  0
  Votes
  6
  Posts
  118
  Views

  K

  @fliptw that's right
• P

  [SOLVED] Unable to launch Shibari.Dom.Server in powershell
  • pinky  

  13
  0
  Votes
  13
  Posts
  69
  Views

  P

  Everything seems to be OK now Thank you. I have to cook some cookies ! (and I need an adress...)
• R

  [SOLVED] Shibari.Dom.Server closes window, does not work second time
  • RDP  

  4
  0
  Votes
  4
  Posts
  132
  Views

  

  Ah I see, thanks for sharing!